Troynik PND 25x3/4x25 with internal thread

Troynik PND 25x3/4x25 with internal thread

It is used for tapping or joining at an angle of 90º into an existing HDPE line of a water pipeline of pipeline fittings, threaded fittings and pipes made of other materials. On both sides of HDPE pipes of the same diameter are connected to the tee using crimp nuts-caps. The third side (outlet) of the tee has an internal thread (nut). For the tightness of the threaded connection, a seal must be used. The connection can be disassembled and reassembled if necessary. The HDPE tee with a threaded connection can function as a saddle on the pipe, while its installation in the line is considered more appropriate at high pressure.

Characteristic

Nominal bore                  25 mm

Country of origin          Ukraine

Tee material                 Polyethylene

Tee Type                       Reducing

Working medium           Water

Maximum temperature of the working medium      40 degrees

Connection type           Threaded