Plumbing online store

050-840-67-47    096-384-67-81


Troynik PND 20x3/4''x20 with external thread

  • Troynik PND 20x3/4''x20 with external thread
  • Brand: Украина
  • Product Code: 1835
  • Availability: В наличии


from 1 pc.1 24.14 грн.
from 10 pc.1 18.42 грн.

Troynik PND 20x3/4''x20 with external thread

Clamping tee with external thread for plastic pipes is used when installing an external water supply system.
The advantage of polypropylene tees is resistance to corrosion and the effects of chemically aggressive media.
Male compression tee is another type of fitting on the compression list.A compression tee with an external thread is used for the installation of polyethylene pipes used in the construction of plumbing systems intended for transporting both drinking and industrial water, used for the construction of irrigation systems in greenhouses, agriculture, as well as private households. 90º into the already existing HDPE line of the water pipeline of pipeline fittings, threaded fittings and pipes made of other materials.On both sides of HDPE pipes of the same diameter are connected to the tee using crimp nuts-caps. The third side (outlet) of the tee has an external thread (union). For the tightness of the threaded connection, a seal must be used. The connection can be disassembled and reassembled if necessary. The HDPE tee with a threaded connection can function as a saddle on the pipe, while its installation in the line is considered more appropriate at high pressure.

Another advantage is the absence of salt and lime deposits, resistance to deformation when water freezes in the pipeline.
The service life is more than 50 years with proper installation and operation.

Compression tees can be used in almost all known communication systems, mounted in an open way, into channels and into the soil.
The compression fitting sealing system consists of: a clamping cap, a rubber seal, a ferrule (collet) and a press-in sleeve.
Due to the simplicity of the design, the compression fittings are installed quite easily, and they can be assembled and disassembled many times without losing their working properties.

     Shaped compression parts for PE pipes are made of impact-resistant polypropylene homopolymer by injection molding according         to the established technology.
     Compression parts are designed for a pressure of 16 Bar at a temperature of +20 ° C for diameters from 20 to 75 inclusive.
     Shaped compression parts are intended for cold water supply networks, incl. for domestic and drinking water supply with a                   maximum water temperature of +60 ° C.


Nominal bore               20 mm

Material                        polypropylene

A type                          tee

View                           transitional

Appointment              for polyethylene HDPE pipes

Pressure class          PN6

Thread, inches    3/4"

Maximum working pressure of water at 20 degrees, bar       16

Modification               external thread

Application area        cold water supply

Buy product Troynik PND 20x3/4''x20 with external thread in our online store

Write a review

Note: HTML is not translated!
    Bad           Good