Plumbing online store

050-840-67-47    096-384-67-81


Steel bend 133х5 DN 125

  • Steel bend 133х5 DN 125


from 1 pc.1 532.49 грн.

Nominal passage DN -125 mm Outer diameter (DN) -133 mm Wall thickness-5 mm Material-steel

Steel bend 133х5 DN 125

Steel bends - a connecting piece that serves to change the direction of the pipeline. A branch is a piece of pipe bent at a certain angle. Elbows are made of various steel grades.

Steel bends 133x5 steeply curved are made of carbon steel by hot bending. Welded connection. The main working medium of the bends is water, steam and gas. Pressure up to 16 MPa. The main purpose of the bends is to connect steel pipes for various purposes.

The steeply bent one-piece is made of carbon and low-alloy steel from pipes by stamping or pulling along a horn-shaped core. They are used for pipelines for various purposes, at an operating pressure of up to 160 atm at a temperature of -70 to +450 ° C.

Main characteristics of the bend:

Nominal diameter DN, mm:               125

Outside diameter Dn, mm:                 133,0

Wall thickness, mm:                           5

Bending angle, °:                               90

Material:                                            steel 20           

Buy product Steel bend 133х5 DN 125 in our online store

Write a review

Note: HTML is not translated!
    Bad           Good