Ball valve 3/4" V V "STA" butterfly brass

 Ball valve  3/4" V V  "STA" butterfly  brass

The ball valve is used as a shut-off valve in drinking and service water networks up to an operating pressure of 1.6 Mpa. The ball valve is made directly from brass. Such brass alloy ball valves are considered to be of the highest quality. Brass body ensures durability. The ball valve closes the water flow with a handle shaped like a handle. The handle is made of steel and the outside is nickel-plated with a thin layer of polyvinyl chloride.The rotary locking element - the ball - is made of steel with subsequent nickel plating to increase the service life and reduce friction during control. Connection to the pipeline with an internal thread on one side and an internal external thread ensures a sufficient level of tightness of the pipeline system. As a ball valve seal, sanitary flax is usually used in combination with a special paste or FUM - tape.

Characteristic

Shutter type                     Ball

Tap diameter                   3/4 "

Manual drive                  Butterfly handle

The maximum operating temperature is   95 degrees.

Mounting method           Horizontal /vertical

Maximum working pressure                    16 bar

Drive unit                       Manual

Body material                Brass  

Coating                         without cover

Working medium          Water    

Connection type         Threaded